Skip to main content
added 41 characters in body
Source Link

Have the part commercially printed in metal.

I haven't used a commercial 3D print service so I can't recommend one, but I know there are many out there and the prices are reasonable. For example, I found that if their terms of service did not prohibit weapons, I could have had Shapeways print magazines for my FX air rifle in gold plated, hand polished stainless steel for less than FX charges for one machined out of aluminum.

So, print the part yourself in whatever material you have available to ensure that it fits and operates correctly. Then upload the file to a company that can print it in metal.

A possible DIY alternative, depending on the shape and size of the part, would be lost PLA casting. Hobbyists usually do this with aluminum.

Have the part commercially printed in metal.

I haven't used a commercial 3D print service so I can't recommend one, but I know there are many out there and the prices are reasonable. For example, I found that if their terms of service did not prohibit weapons, I could have had Shapeways print magazines for my FX air rifle in gold plated, hand polished stainless steel for less than FX charges for one machined out of aluminum.

So, print the part yourself in whatever material you have available to ensure that it fits and operates correctly. Then upload the file to a company that can print it in metal.

A possible DIY alternative, depending on the shape and size of the part, would be lost PLA casting.

Have the part commercially printed in metal.

I haven't used a commercial 3D print service so I can't recommend one, but I know there are many out there and the prices are reasonable. For example, I found that if their terms of service did not prohibit weapons, I could have had Shapeways print magazines for my FX air rifle in gold plated, hand polished stainless steel for less than FX charges for one machined out of aluminum.

So, print the part yourself in whatever material you have available to ensure that it fits and operates correctly. Then upload the file to a company that can print it in metal.

A possible DIY alternative, depending on the shape and size of the part, would be lost PLA casting. Hobbyists usually do this with aluminum.

Source Link

Have the part commercially printed in metal.

I haven't used a commercial 3D print service so I can't recommend one, but I know there are many out there and the prices are reasonable. For example, I found that if their terms of service did not prohibit weapons, I could have had Shapeways print magazines for my FX air rifle in gold plated, hand polished stainless steel for less than FX charges for one machined out of aluminum.

So, print the part yourself in whatever material you have available to ensure that it fits and operates correctly. Then upload the file to a company that can print it in metal.

A possible DIY alternative, depending on the shape and size of the part, would be lost PLA casting.