Timeline for MINTEMP BED Fixed error when running consecutive print
Current License: CC BY-SA 4.0
3 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Sep 18, 2020 at 17:33 | comment | added | wonton | yes, the issue turned out to be hardware and not gcode. there was a defect with the bed thermistor cable which only faults at the far back corner. my consecutive prints occur at these corners which is why I incorrectly suspected enabling consecutive printing as the cause. | |
| Sep 18, 2020 at 17:30 | vote | accept | wonton | ||
| Sep 16, 2020 at 11:08 | history | answered | 0scar♦ | CC BY-SA 4.0 |