Skip to main content
3D Printing

Return to Question

edited tags
Link
Davo
Davo
  • 2.4k
  • 1
  • 14
  • 28
Improved formatting, tags
Source Link
0scar ♦
0scar ♦
  • 37.1k
  • 12
  • 67
  • 155

Bltouch BLTouch not touching bed while leveling

I have an enderEnder 3 proPro that I installed a bltouchBLTouch sensor on. After I auto-home, I level bed and it deploys the probe in the right spot, but doesn't go down far enough, then goes back up and stops leveling.

I am using the wiring for bltouchBLTouch for zZ homing on https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/firmware/V1 mini E3 v1.2. I am using Marlin Bugfix-2.0 with BltouchBLTouch and a few other things enabled. Configuration Files:https://drive.google.com/drive/folders/1mWt4nngrnQvXDfSZE2WamGfrVnOf-52c?usp=sharing Video of Problem: https://i.sstatic.net/45KrR.jpg

Bltouch not touching bed while leveling

I have an ender 3 pro that I installed a bltouch on. After I auto-home, I level bed and it deploys the probe in the right spot, but doesn't go down far enough, then goes back up and stops leveling.

I am using the wiring for bltouch for z homing on https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/firmware/V1.2. I am using Marlin Bugfix-2.0 with Bltouch and a few other things enabled. Configuration Files:https://drive.google.com/drive/folders/1mWt4nngrnQvXDfSZE2WamGfrVnOf-52c?usp=sharing Video of Problem: https://i.sstatic.net/45KrR.jpg

BLTouch not touching bed while leveling

I have an Ender 3 Pro that I installed a BLTouch sensor on. After I auto-home, I level bed and it deploys the probe in the right spot, but doesn't go down far enough, then goes back up and stops leveling.

I am using the wiring for BLTouch for Z homing on SKR mini E3 v1.2. I am using Marlin Bugfix-2.0 with BLTouch and a few other things enabled.

Source Link
vicious_hog
vicious_hog
  • 19
  • 5

Bltouch not touching bed while leveling

I have an ender 3 pro that I installed a bltouch on. After I auto-home, I level bed and it deploys the probe in the right spot, but doesn't go down far enough, then goes back up and stops leveling.

I am using the wiring for bltouch for z homing on https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/firmware/V1.2. I am using Marlin Bugfix-2.0 with Bltouch and a few other things enabled. Configuration Files:https://drive.google.com/drive/folders/1mWt4nngrnQvXDfSZE2WamGfrVnOf-52c?usp=sharing Video of Problem: https://i.sstatic.net/45KrR.jpg