Timeline for How to replace the nozzle in my hotend assembly?
Current License: CC BY-SA 4.0
9 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Feb 1, 2021 at 23:29 | history | edited | Trish | CC BY-SA 4.0 |
edited tags
|
| Feb 1, 2021 at 23:22 | vote | accept | octopus8 | ||
| Feb 1, 2021 at 23:21 | comment | added | Trish | @octopus8 you are aiming for a knowledgebase question, yes? Sure, let's go ahead! | |
| Feb 1, 2021 at 23:19 | comment | added | octopus8 | Actually I hope to get (incrementally) a general procedure. I believe there is one linear routine (like order of installing and tightening nozzle with heatbreak) - with remarks here or there to remember of something in respect for specific hardware (type of extruder and hotend rather than specific printer). Generally I am heading to upvote any answers adding some value (like many in yours) - and accept Trish work as the leading answer, and also evolve it furter (hope to have a green light from they). | |
| Feb 1, 2021 at 19:20 | comment | added | Perry Webb | Trish gives a step-by-step procedure that is easier to follow when changing a nozzle. You seemed to be asking why, so I've tried to answer why. Hopefully, you have the procedure specific to you printer model. That is the safest to actually follow. Otherwise, you have Trish's steps. | |
| Feb 1, 2021 at 17:12 | history | edited | Trish | CC BY-SA 4.0 |
edited body
|
| Feb 1, 2021 at 17:02 | answer | added | Trish | timeline score: 2 | |
| Feb 1, 2021 at 15:41 | answer | added | Perry Webb | timeline score: 2 | |
| Feb 1, 2021 at 6:58 | history | asked | octopus8 | CC BY-SA 4.0 |