Timeline for Ender 3 + SKR 1.4 + Marlin 2.0.x bugfix - what bed size/min/max positions should I use?
Current License: CC BY-SA 4.0
6 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Feb 15, 2021 at 23:13 | answer | added | 0scar♦ | timeline score: 2 | |
| Feb 15, 2021 at 21:19 | comment | added | octopus8 | Hi Alex. Are you able to properly home the printer, or not? I understood that after you home, the Y movement is limited by your hardware setup (mounted tensioner) to only 220 mm. But you would like to have full 235 mm. What tensioner is installed there? From your description I could read that there is a collision, so I would say it is a hardware issue... If you can home the printer, you can limit the print area. | |
| S Feb 15, 2021 at 19:46 | history | suggested | agarza | CC BY-SA 4.0 |
fixed capitalization, grammar, spelling; fixed SI units
|
| Feb 15, 2021 at 19:43 | review | Suggested edits | |||
| S Feb 15, 2021 at 19:46 | |||||
| Feb 15, 2021 at 19:30 | review | First posts | |||
| Feb 15, 2021 at 21:19 | |||||
| Feb 15, 2021 at 19:27 | history | asked | Alex Dow | CC BY-SA 4.0 |