Timeline for Creality CR-10 problems with extrusion while printing
Current License: CC BY-SA 4.0
3 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Oct 10, 2021 at 17:36 | comment | added | Mast | "Re-level the bed with a (thicker) piece of paper or with a feeler gauge." The CR 10 has an automatic bed level system. When in doubt, run that program. The Z-adjustment is located near that option. | |
| Oct 4, 2021 at 8:15 | history | edited | 0scar♦ | CC BY-SA 4.0 |
Added description of the possible cause
|
| Oct 3, 2021 at 22:04 | history | answered | 0scar♦ | CC BY-SA 4.0 |