Timeline for Under-extrusion halfway into print - Dremel 3D45 -PETG
Current License: CC BY-SA 4.0
3 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| May 18, 2022 at 6:59 | comment | added | Trish | you can't not have a seam in a layer, but you can have them not aligned to one another as you realised. | |
| May 18, 2022 at 0:55 | comment | added | rosi97 | I "removed" the seam by setting it to random and did some calibration parts for flow and retraction - everything is looking good now. But there are still problems with the dimensional accuracy between the X and Y axis - around 0.15 deviation. Just like the dent before the seam on the pictures above. Do you have any suggestions? Already checked belt tension... | |
| May 17, 2022 at 22:49 | history | answered | Trish | CC BY-SA 4.0 |