Skip to main content
3D Printing

Return to Question

unit spacing according to standard
Source Link
0scar ♦
0scar ♦
  • 37.1k
  • 12
  • 67
  • 155

Connecting 12V12 V Laser Module to 24V24 V Control Board

I have a 3D printer (Artillery Genius Pro) with a 24 V motherboard. I want to connect this motherboard a 12 V laser engraver module. If my motherboard was 12 V (with 12 V, GND, and PWM pins), I believe I could do it. In that case, I would connect 12 V, GND, and PWM of the laser module to 12 V, GND and Blower Fan (as PWM) of the motherboard. But my 3D printer has a 24V24 V board. How can I connect my 12 V laser module to my 24 V motherboard?

Your guidance in this direction will be highly appreciated.

Connecting 12V Laser Module to 24V Control Board

I have a 3D printer (Artillery Genius Pro) with a 24 V motherboard. I want to connect this motherboard a 12 V laser engraver module. If my motherboard was 12 V (with 12 V, GND, and PWM pins), I believe I could do it. In that case, I would connect 12 V, GND, and PWM of the laser module to 12 V, GND and Blower Fan (as PWM) of the motherboard. But my 3D printer has a 24V board. How can I connect my 12 V laser module to my 24 V motherboard?

Your guidance in this direction will be highly appreciated.

Connecting 12 V Laser Module to 24 V Control Board

I have a 3D printer (Artillery Genius Pro) with a 24 V motherboard. I want to connect this motherboard a 12 V laser engraver module. If my motherboard was 12 V (with 12 V, GND, and PWM pins), I believe I could do it. In that case, I would connect 12 V, GND, and PWM of the laser module to 12 V, GND and Blower Fan (as PWM) of the motherboard. But my 3D printer has a 24 V board. How can I connect my 12 V laser module to my 24 V motherboard?

Your guidance in this direction will be highly appreciated.

fixed SI units
Source Link
agarza
agarza
  • 1.7k
  • 2
  • 16
  • 33

I have a 3D printer (Artillery Genius Pro) with a 24V24 V motherboard. I want to connect this motherboard a 12V Laser12 V laser engraver module. If my motherboard was 12V12 V (with 12V12 V, GND, and PWM pins), I believe I could do it. In that case, I would connect 12V12 V, GND, and PWM of the laser module to 12V12 V, GND and Blower Fan (as PWM) of the motherboard. But my 3D printer has a 24V board. How can I connect my 12V12 V laser module to my 24V24 V motherboard?

Your guidenceguidance in this direction will be higlyhighly appreciated. Thank you.

I have a 3D printer (Artillery Genius Pro) with a 24V motherboard. I want to connect this motherboard a 12V Laser engraver module. If my motherboard was 12V (with 12V, GND and PWM pins), I believe I could do it. In that case, I would connect 12V, GND, PWM of the laser module to 12V, GND and Blower Fan (as PWM) of the motherboard. But my 3D printer has a 24V board. How can I connect my 12V laser module to my 24V motherboard?

Your guidence in this direction will be higly appreciated. Thank you.

I have a 3D printer (Artillery Genius Pro) with a 24 V motherboard. I want to connect this motherboard a 12 V laser engraver module. If my motherboard was 12 V (with 12 V, GND, and PWM pins), I believe I could do it. In that case, I would connect 12 V, GND, and PWM of the laser module to 12 V, GND and Blower Fan (as PWM) of the motherboard. But my 3D printer has a 24V board. How can I connect my 12 V laser module to my 24 V motherboard?

Your guidance in this direction will be highly appreciated.

Source Link
bkarpuz
bkarpuz
  • 123
  • 3

Connecting 12V Laser Module to 24V Control Board

I have a 3D printer (Artillery Genius Pro) with a 24V motherboard. I want to connect this motherboard a 12V Laser engraver module. If my motherboard was 12V (with 12V, GND and PWM pins), I believe I could do it. In that case, I would connect 12V, GND, PWM of the laser module to 12V, GND and Blower Fan (as PWM) of the motherboard. But my 3D printer has a 24V board. How can I connect my 12V laser module to my 24V motherboard?

Your guidence in this direction will be higly appreciated. Thank you.