Timeline for When leveling hotend always slams into bed?
Current License: CC BY-SA 3.0
4 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Oct 19, 2016 at 7:10 | comment | added | James T | It is planar, its just angled such that the left side is higher than the right side, but only so slightly as it makes a difference @Z=~0mm | |
| Oct 18, 2016 at 15:55 | comment | added | Carl Witthoft | Yeah, if your bed isn't planar, you're kind of screwed :-( . Best to replace/upgrade to something better. | |
| Oct 18, 2016 at 7:44 | comment | added | James T | It seems its unclear what i was getting at. It levels fine, but the centre of the bed is lower than the left side, so when moving left to home the X when Z=0 (in the centre) it scrapes the bed. Z_RAISE_BETWEEN_PROBINGS doesnt apply when its homing X/Y. Also, no PCB bed, its an aluminium plate. | |
| Oct 18, 2016 at 7:04 | history | answered | Tom van der Zanden | CC BY-SA 3.0 |