Timeline for Error: Dry mode when moving Z-Axis
Current License: CC BY-SA 3.0
4 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Apr 20, 2017 at 8:22 | comment | added | Mc Kernel | I think I shortcircuited GND and Data+ from heating bed and that harmed the mainboard, even if I desconnect the heating bed, printer still showing always 95ºC, it may be a random value, or maybe it's the last value that printer read from the bed and got stuck in ROM or something, I have no idea | |
| Apr 20, 2017 at 8:17 | comment | added | raviriley | Are you saying everything except for the bed heating up works? If yes, most likely the connector on the mainboard burned. This happened to me for the wanhao i3 and I am getting a replacement. The connectors are not rated for high voltages, so they burn/melt. | |
| Apr 19, 2017 at 7:39 | comment | added | Mc Kernel | The wiring is ok and firmly connected, actually everything works fine but bed's temp, however, I'm not able to print anything since it enables dry mode cooling the extruder, aI'm pretty sure that the controller board has been harmed, I'm waiting for a replacement which should arrive this week, I also will try burning a custom firmware to the harmed controller board. I'll update soon | |
| Apr 16, 2017 at 1:40 | history | answered | raviriley | CC BY-SA 3.0 |