Skip to main content
3D Printing

Return to Answer

Fixed typo
Source Link
Greenonline ♦
Greenonline ♦
  • 6.7k
  • 8
  • 39
  • 68

Make sure and pay attention to is safety.

I have heard of more than one report of a RepRap printer going up in flames. On example of that is if the thermistor fails, or gets disconnected, and the controller puts the bed, or extruder, into thermal runaway.

Make you make the enclosure out of a non-combustible material, so you don't add any fuel to the fire.

Make sure and pay attention to is safety.

I have heard of more than one report of a RepRap printer going up in flames. On example of that is if the thermistor fails or gets disconnected and the controller puts the bed or extruder into thermal runaway.

Make you make the enclosure out of a non-combustible material so you don't add any fuel to the fire.

Make sure and pay attention to safety.

I have heard of more than one report of a RepRap printer going up in flames. On example of that is if the thermistor fails, or gets disconnected, and the controller puts the bed, or extruder, into thermal runaway.

Make you make the enclosure out of a non-combustible material, so you don't add any fuel to the fire.

Source Link
markshancock
markshancock
  • 2.5k
  • 2
  • 14
  • 35

Make sure and pay attention to is safety.

I have heard of more than one report of a RepRap printer going up in flames. On example of that is if the thermistor fails or gets disconnected and the controller puts the bed or extruder into thermal runaway.

Make you make the enclosure out of a non-combustible material so you don't add any fuel to the fire.