Timeline for Filament is not stuck
Current License: CC BY-SA 3.0
7 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Feb 13, 2018 at 8:13 | comment | added | Granny | @mac Ik :) I was talking about it in general for everyone that considers themselves "beginners". | |
| Feb 13, 2018 at 8:12 | comment | added | mac | @Granny - yes, but I'm not the one having adhesion problems here! ;) | |
| Feb 13, 2018 at 7:33 | comment | added | Granny | @mac I myself started printing almost 1 year ago, I just sat down for 15 min when i got the printer trying different amount of friction on the a4 paper until i had just the right squish. You don't have to be a advanced "3D printerer" to get the perfect bed leveling. If you know the perfect amount of friction, bed leveling is a easy, no matter what surface you are on :) | |
| Feb 12, 2018 at 21:27 | vote | accept | Hola Soy Edu Feliz Navidad | ||
| Feb 12, 2018 at 15:57 | comment | added | mac | @Granny - thank you for the input, from your comment it seems printing on metal is similar to printing on glass (i.e.: unforgiving material). I would argue that for a beginner it is advisable to get printing with the help of some surface prepping: much less frustration while you get to learn the ropes and appreciate what "perfectly level" means. :) | |
| Feb 12, 2018 at 14:28 | comment | added | Granny | Printing on a bare metal surface is perfectly fine. Just keep it clean. But the reason why its not working here is because the bed leveling is terrible. You can see in the video that the nozzle goes from very close to the bed to very far from the bed during the print. Also it is printing WAY to fast for it to adhere properly. Slowing down and doing a proper bed level will most certainly fix this problem :) | |
| Feb 10, 2018 at 23:24 | history | answered | mac | CC BY-SA 3.0 |