Skip to main content
13 events
when toggle format what by license comment
Apr 23, 2018 at 14:29 comment added Ilya Smirnoff @profesor79 I've already tried everything. well... It's not working
Apr 22, 2018 at 17:52 comment added profesor79 please check that 3dprinting.stackexchange.com/a/5849/9730 @IlyaSmirnoff
Apr 22, 2018 at 17:08 comment added Ilya Smirnoff @profesor79 now i have problems with AVRDUDEhttp://joxi.ru/DrlvqNdIvN3p72.png
Apr 22, 2018 at 17:06 comment added Ilya Smirnoff @profesor79 none of the solutions worked :(
Apr 20, 2018 at 16:26 comment added profesor79 it is a cheap usb to serial bridge that is in most arduino clones
Apr 20, 2018 at 16:25 comment added Ilya Smirnoff @0scar what are the CH340 drivers?
Apr 20, 2018 at 8:25 comment added profesor79 @IlyaSmirnoff please see 3dprinting.stackexchange.com/a/5849/9730 for flashing reference
Apr 20, 2018 at 6:51 comment added 0scar Are you sure you installed the CH340 drivers and use the correct COM port? Does it compile?
Apr 20, 2018 at 5:28 comment added Ilya Smirnoff i've downloaded the firmware that you've recommended and it doesn't want to load joxi.ru/J2b6n9whXpYy02.png
Apr 19, 2018 at 16:12 history edited profesor79 CC BY-SA 3.0
added 53 characters in body
Apr 19, 2018 at 15:32 comment added profesor79 did you set 2nd extruder in config.h? maybe it is time to get github.com/JimBrown/MarlinTarantula as I am using that on minte
Apr 19, 2018 at 15:30 comment added Ilya Smirnoff I've already tried doing that in Slic3r and that didn't help :( And also it, probably, won't work if I am to move it from menu screen, right? joxi.ru/KAxnKV1FMNwkXm.png
Apr 19, 2018 at 15:23 history answered profesor79 CC BY-SA 3.0