Timeline for Troubleshooting filament slip on MakerBot 5
Current License: CC BY-SA 4.0
6 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Apr 16, 2021 at 23:23 | comment | added | Winfred | This was the cause in my case. I have my filament roll on the side and at just the right angle, the filament would bent slightly away from the wheel, losing contact. A bit of paper jammed behind the injection molded part solved the issue. | |
| Jul 6, 2018 at 21:36 | history | edited | Greenonline♦ | CC BY-SA 4.0 |
Added link to StarWind0's answer, and added italics
|
| Jul 6, 2018 at 19:48 | comment | added | Greenonline♦ | Hi Adam and welcome to SE.3D Printing! I would like to kindly ask you, please do not add additional information to someone else's answer. If you have something to add, please post your own answer (referring back to the answer that you wish to ameliorate, if need be, using the URL of the answer). Your suggested edit, while it may have been correct, was rather confusing, and caused some flags to be raised. Thank you for posting your own answer here... :-) If you wish to edit someone else's answer to correct typos, grammar, fix units, links, or incorrect formatting, please feel free to do so. | |
| Jul 6, 2018 at 17:54 | review | Late answers | |||
| Jul 6, 2018 at 19:42 | |||||
| Jul 6, 2018 at 17:37 | review | First posts | |||
| Jul 7, 2018 at 12:53 | |||||
| Jul 6, 2018 at 17:34 | history | answered | Adam Steinmark | CC BY-SA 4.0 |