Timeline for Why does MakerBot software shows holes in the wall of a 3d model?
Current License: CC BY-SA 4.0
11 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Jul 25, 2018 at 10:50 | vote | accept | Turkhan Badalov | ||
| Jul 25, 2018 at 6:30 | answer | added | 0scar♦ | timeline score: 1 | |
| Jul 16, 2018 at 15:02 | comment | added | Trish | the most interesting would be: Version number of the software you use, Layer height. Wall thickness. Infill density. Infill pattern. What type of bed adhesion helper (is that a raft?). Material. Then a little Information about your model: if it is hollow or solid in design? It might help if you upload your STL so we can look if that is faulty for some reason, but if it is just a simple extrusion as said, that should not be the case unless the file is corrupt. | |
| Jul 16, 2018 at 14:59 | comment | added | Turkhan Badalov | @Trish what properties do you need? I set default High preset | |
| Jul 16, 2018 at 14:59 | comment | added | Turkhan Badalov | @CarlWitthoft I don't know how to call it. I am talking about leftmost part which is different from the pattern of the rest of the wall (face looking at the camera) | |
| Jul 16, 2018 at 14:52 | comment | added | Trish | What are your software settings? This could be anyting without proper information as we could not recreate this. | |
| Jul 16, 2018 at 14:45 | review | Close votes | |||
| Aug 7, 2018 at 3:05 | |||||
| Jul 16, 2018 at 14:27 | comment | added | Carl Witthoft | Are you confusing infill patterns with holes? Or display resolution (moire pattern) with actual surfaces? What is your head speed setting, layer thickness, etc? | |
| Jul 16, 2018 at 14:05 | history | edited | Greenonline♦ | CC BY-SA 4.0 |
Added image description and tags
|
| Jul 16, 2018 at 13:44 | review | First posts | |||
| Jul 16, 2018 at 14:05 | |||||
| Jul 16, 2018 at 13:43 | history | asked | Turkhan Badalov | CC BY-SA 4.0 |