Timeline for Print came out like a wafer
Current License: CC BY-SA 4.0
7 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Aug 13, 2020 at 22:19 | history | edited | 0scar♦ | CC BY-SA 4.0 |
Added additional information
|
| May 2, 2019 at 6:40 | history | edited | 0scar♦ | CC BY-SA 4.0 |
Added link
|
| May 1, 2019 at 3:44 | comment | added | R.. GitHub STOP HELPING ICE | The Cura issue seems to be that they moved filament diameter to a per-extruder setting when adding multi-extruder support, and now the default is wrong and needs to be fixed for each extruder. | |
| Apr 30, 2019 at 20:38 | comment | added | user1053263 | I upgraded Cura (I got the version from the support page of my printer gearrev.com/pages/support). You are correct in the filament issue diameter too. I had this set to 1.75, when i opened it, it was at 2.85 which i figured was a mistake because i remember setting it to 1.75 before print. So i changed it for the screen shot figuring it maybe reset when I shut down cura last time. Then I checked the nozzle, which was fine, the heatbreak however; That needed some work. The teflon tube was warped. Printing now and even the raft looks better. I appreciate the answer! | |
| Apr 30, 2019 at 20:33 | vote | accept | user1053263 | ||
| Apr 30, 2019 at 9:52 | history | edited | 0scar♦ | CC BY-SA 4.0 |
Improved formatting
|
| Apr 30, 2019 at 6:27 | history | answered | 0scar♦ | CC BY-SA 4.0 |