I have been having some issues with my Cocoon Create Model Maker/Wanhao Duplicator i3 Mini. The hotend doesn't get up to temperature.

I will go to any of the heating functions (Start print, preheat, add filament etc.) and it will begin to reheat the nozzle. The temperature rises until eventually, it stops at any number that is not the desired print temp and the screen freezes. Sometimes it will stop at 150degreesC sometimes 180. It all seems quite random but the screen is frozen when this happens.

If anyone had any thoughts it would be much appreciated. My last printer was abandoned due to a similar issue and it's incredibly frustrating. 😥

Many thanks, Monique

I have been having some issues with my Cocoon Create Model Maker/Wanhao Duplicator i3 Mini. The hotend doesn't get up to temperature.

I will go to any of the heating functions (start print, preheat, add filament, etc.) and it will begin to reheat the nozzle. The temperature rises until eventually, it stops at any number that is not the desired print temp and the screen freezes. Sometimes it will stop at 150 °C sometimes 180 °C. It all seems quite random but the screen is frozen when this happens.

If anyone had any thoughts it would be much appreciated. My last printer was abandoned due to a similar issue and it's incredibly frustrating.