I don't know how to describe it, but when I print on my Phrozen sonic mini this resin, this happens (it's siraya tech, but it happens with regular resin too). The bottom half, the stuff furthest from the build plate gets wonky looking. The first picture its supposed to have a flat bottom, but it bulges out, and its supposed to be round, but it's not perfectly round. It printed it at a 45 degree angle, and used a ton of supports, and 3.5s exposure per layer.

I don't know how to describe it, but when I print on my Phrozen Sonic Mini with this resin, this happens (it's Siraya tech, but it happens with regular resin too). The bottom half, the stuff furthest from the build plate gets wonky looking. The first picture, the print supposed to have a flat bottom, but it bulges out, and it has to be round, but it's not perfectly round. I printed it at a 45° angle, and it used a ton of supports, and 3.5  seconds exposure per layer.