Return to Question

I recently upgraded to Simplify3D version 5. With this version, I can now print over WiFi to my Qidi X-Pro. I run an Eero mesh network and the printer is about 6 feet from the router.

I tried printing a model with this version over WiFi and received the following error on the Qidi console:

Illegal gcode in line: xxxx, P_4, T_10470103!

On a second attempt, I received:

Illegal gcode in line xxxx, P_$, T10470000!

The same models print correctly if saved to a USB stick first and then inserted into the printer. I've been in contact with Simplify3d support, but, they can't recreate the problem.

Has anyone encountered this problem? Do you know of a fix?

Update: I ran another test. This time I used the USB device that came with the printer. The print finished without errors. I'm not sure why using a different USB device would impact the WiFi printing.

I recently upgraded to Simplify3D version 5. With this version, I can now print over WiFi to my Qidi X-Pro. I run an Eero mesh network and the printer is about 6 feet from the router.

I tried printing a model with this version over WiFi and received the following error on the Qidi console:

Illegal gcode in line: xxxx, P_4, T_10470103!

On a second attempt, I received:

Illegal gcode in line xxxx, P_$, T10470000!

The same models print correctly if saved to a USB stick first and then inserted into the printer. I've been in contact with Simplify3d support, but, they can't recreate the problem.

Has anyone encountered this problem? Do you know of a fix?

I recently upgraded to Simplify3D version 5. With this version, I can now print over WiFi to my Qidi X-Pro. I run an Eero mesh network and the printer is about 6 feet from the router.

I tried printing a model with this version over WiFi and received the following error on the Qidi console:

Illegal gcode in line: xxxx, P_4, T_10470103!

On a second attempt, I received:

Illegal gcode in line xxxx, P_$, T10470000!

The same models print correctly if saved to a USB stick first and then inserted into the printer. I've been in contact with Simplify3d support, but, they can't recreate the problem.

Has anyone encountered this problem? Do you know of a fix?

I recently upgraded to Simplify3D version 5. With this version, I can now print over WiFi to my Qidi X-Pro. I run an Eero mesh network and the printer is about 6 feet from the router.

I tried printing a model with this version over WiFi and received the following error on the Qidi console:

Illegal gcode in line: xxxx, P_4, T_10470103!

On a second attempt, I received:

Illegal gcode in line xxxx, P_$, T10470000!

The same models print correctly if saved to a USB stick first and then inserted into the printer. I've been in contact with Simplify3d support, but, they can't recreate the problem.

Has anyone encountered this problem? Do you know of a fix?

Update: I ran another test. This time I used the USB device that came with the printer. The print finished without errors. I'm not sure why using a different USB device would impact the WiFi printing.

I recently upgraded to Simplify3d version 5. With this version, I can now print over WiFi to my Qidi X-Pro. I run an Eero mesh network and the printer is about 6 feet from the router.

I tried printing a model with this version over WiFi and received the following error on the Qidi console:

Illegal gcode in line: xxxx, P_4, T_10470103!

On a second attempt, I received:

Illegal gcode in line xxxx, P_$, T10470000!

The same models print correctly if saved to a USB stick first and then inserted into the printer. I've been in contact with Simplify3d support, but, they can't recreate the problem.

Has anyone encountered this problem? Do you know of a fix?

I recently upgraded to Simplify3D version 5. With this version, I can now print over WiFi to my Qidi X-Pro. I run an Eero mesh network and the printer is about 6 feet from the router.

I tried printing a model with this version over WiFi and received the following error on the Qidi console:

Illegal gcode in line: xxxx, P_4, T_10470103!

On a second attempt, I received:

Illegal gcode in line xxxx, P_$, T10470000!

The same models print correctly if saved to a USB stick first and then inserted into the printer. I've been in contact with Simplify3d support, but, they can't recreate the problem.

Has anyone encountered this problem? Do you know of a fix?