Return to Question

Improved formatting and title

Source Link

edited Jun 9, 2019 at 5:16

3d printing How to prevent stringing with 0.25 mm nozzle using anycubic i3 mega?

Good Day,

When iI print with a 0.4 mm nozzle iI have no problem with stringing at all but because iI need a more detailed print iI must use a 0.25 mm nozzle.

I use ultimate curaUltimaker Cura and anycubican Anycubic i3 megaMega.

What i tried so far: Enable/Disable Z hop Tried different retraction distance and speed. Tried with lower temperature Different wall thickness

If you have any suggestion please let me know

Thank you.

Source Link

asked Jun 8, 2019 at 18:27

Good Day,

When i print with a 0.4 nozzle i have no problem with stringing at all but because i need a more detailed print i must use a 0.25.

I use ultimate cura and anycubic i3 mega.

What i tried so far: Enable/Disable Z hop Tried different retraction distance and speed. Tried with lower temperature Different wall thickness

If you have any suggestion please let me know

Thank you