Skip to main content
3D Printing

Return to Question

Notice removed Draw attention by CommunityBot
Bounty Ended with 0scar's answer chosen by CommunityBot
[Edit removed during grace period]
Source Link
Diego
Diego
  • 31
  • 5
Notice added Draw attention by Diego
Bounty Started worth 100 reputation by Diego
Added tag and image descriptions and image hover tags. Also added block quote formatting to better distinguish the settings dialogs
Source Link
Greenonline ♦
Greenonline ♦
  • 6.7k
  • 8
  • 39
  • 68

I am printing this piece using a 0.4 mm nozzle. It happens that the piece on the chin does not print properly.

I have already tried the tree mode supports, touching the plate and in all the places but the same thing happens.

I include photos of my configuration in Cura.

Photo of printPhoto of print

Photo of bad print qualityPhoto of bad print quality

enter image description here

Settings - quality

enter image description here

Settings - speed

enter image description here

Settings - support

enter image description hereScreenshot of Cura - showing supports

I am printing this piece using a 0.4 mm nozzle. It happens that the piece on the chin does not print properly.

I have already tried the tree mode supports, touching the plate and in all the places but the same thing happens.

I include photos of my configuration in Cura.

Photo of print

Photo of bad print quality

enter image description here

enter image description here

enter image description here

enter image description here

I am printing this piece using a 0.4 mm nozzle. It happens that the piece on the chin does not print properly.

I have already tried the tree mode supports, touching the plate and in all the places but the same thing happens.

I include photos of my configuration in Cura.

Photo of print

Photo of bad print quality

Settings - quality

Settings - speed

Settings - support

Screenshot of Cura - showing supports

added 123 characters in body
Source Link
Diego
Diego
  • 31
  • 5

I am printing this piece using a 0.4 mm nozzle. It happens that the piece on the chin does not print properly.

I have already tried the tree mode supports, touching the plate and in all the places but the same thing happens.

I include photos of my configuration in Cura.

Photo of print .

Photo of bad print quality

Cura configuration 1enter image description here

Cura configuration 2enter image description here

Cura configuration 3enter image description here

enter image description here

I am printing this piece using a 0.4 mm nozzle. It happens that the piece on the chin does not print properly.

I have already tried the tree mode supports, touching the plate and in all the places but the same thing happens.

I include photos of my configuration in Cura.

Photo of print .

Photo of bad print quality

Cura configuration 1

Cura configuration 2

Cura configuration 3

I am printing this piece using a 0.4 mm nozzle. It happens that the piece on the chin does not print properly.

I have already tried the tree mode supports, touching the plate and in all the places but the same thing happens.

I include photos of my configuration in Cura.

Photo of print

Photo of bad print quality

enter image description here

enter image description here

enter image description here

enter image description here

fixed capitalization, punctuation, grammar, formatting
Source Link
edit approved Jun 6, 2021 at 21:47
agarza
edit approved Jun 6, 2021 at 21:47
agarza
  • 1.7k
  • 2
  • 16
  • 33
Source Link
Diego
Diego
  • 31
  • 5