I have an MK8Makerbot(?) extruder on my HICTOP branded printer.
The problem with the E3D hotend is that the heatbreak is shorter and doesn't protrude through the top of the heatsink. Therefore I can't mount it to the motor mount.
Any ideas?
I have an MK8 extruder on my HICTOP branded printer.
The problem with the E3D hotend is that the heatbreak is shorter and doesn't protrude through the top of the heatsink. Therefore I can't mount it to the motor mount.
Any ideas?
I have an MK8Makerbot(?) extruder on my HICTOP branded printer.
The problem with the E3D hotend is that the heatbreak is shorter and doesn't protrude through the top of the heatsink. Therefore I can't mount it to the motor mount.
Any ideas?
Greenonline ♦
- 6.7k
- 8
- 39
- 68
v6 E3d E3D-v6 hotend on MK8 extruder
I have an mk8MK8 extruder on my hictopHICTOP branded printer.
The problem with the e3dE3D hotend is that the heatbreak is shorter and doesn't protrude through the top of the heatsink. Therefore I can't mount it to the motor mount.
https://i.ytimg.com/vi/F7geQEtyr4I/maxresdefault.jpg
Any ideas?
v6 E3d hotend on MK8 extruder
I have an mk8 extruder on my hictop branded printer.
The problem with the e3d hotend is the heatbreak is shorter and doesn't protrude through the top of the heatsink. Therefore I can't mount it to the motor mount.
https://i.ytimg.com/vi/F7geQEtyr4I/maxresdefault.jpg
Any ideas?
E3D-v6 hotend on MK8 extruder
I have an MK8 extruder on my HICTOP branded printer.
The problem with the E3D hotend is that the heatbreak is shorter and doesn't protrude through the top of the heatsink. Therefore I can't mount it to the motor mount.
Any ideas?
