Revisions to How to change E0 to E1 on Marlin 1.1?

removed dead URL

Source Link

edited Dec 7, 2023 at 18:33

37.1k
12
67
155

I have the same problem as this person but I don't have those lines in my RAMPS.h file as seen here.

I've recently burnt my potentiometer on E0 so the motor isn't working properly anymore. I want to use it on E1 instead. If you have any better idea how to fix this instead of changing code in firmware, feel free to share.

I have the same problem as this person but I don't have those lines in my RAMPS.h file as seen here.

I've recently burnt my potentiometer on E0 so the motor isn't working properly anymore. I want to use it on E1 instead. If you have any better idea how to fix this instead of changing code in firmware, feel free to share.

I have the same problem as this person but I don't have those lines in my RAMPS.h file.

I've recently burnt my potentiometer on E0 so the motor isn't working properly anymore. I want to use it on E1 instead. If you have any better idea how to fix this instead of changing code in firmware, feel free to share.

This has nothing specific to do with PLA, so I removed the tag as is corrupts the search and corrupts the header of the browser tab

Link

edit approved May 15, 2018 at 12:32

0scar ♦

37.1k
12
67
155

added 12 characters in body

Source Link

edited Apr 19, 2018 at 18:10

Ilya Smirnoff

69
1
1
5

I have the same problem as this person this person but I don't have those lines in my RAMPS.h file as seen here.

I've recently burnt my potentiometer on E0 so the motor isn't working properly anymore. I want to use it on E1 instead. If you have any better idea how to fix this instead of changing code in firmware, feel free to share.

I have the same problem as this person but I don't have those lines in my RAMPS.h file as seen here.

I've recently burnt my potentiometer on E0 so the motor isn't working properly anymore. I want to use it on E1 instead. If you have any better idea how to fix this instead of changing code in firmware, feel free to share.

I have the same problem as this person but I don't have those lines in my RAMPS.h file as seen here.

I've recently burnt my potentiometer on E0 so the motor isn't working properly anymore. I want to use it on E1 instead. If you have any better idea how to fix this instead of changing code in firmware, feel free to share.